Annexes:Python

Généralités

Limites de cette section

Cette section n’a pas la prétention de traiter tous les cas possibles d'installation de Python …
Le principe est d'avoir la bonne version et ses dépendances pour le module SQWarePredict.

Avant de vous lancer dans l’installation, vous devez d'abord avoir la version de dbSQWare avec SQWarePredict (v2025.01 mini) pour avoir les dépendances.

Principe

Nous allons :

• Installer Python-3.12.8
• Configurer l'environnement
• Installer les dépendances
• Paramétrer et tester SQWarePredict

Installation

Installation de Python-3.12.8

Téléchargez les sources et mettez-les dans /tmp :

# Install Python-3.12.8
# https://www.python.org/ftp/python/3.12.8/Python-3.12.8.tgz

 1 # From : dbsqware@vmsqwarebox
 2 
 3 mkdir $HOME/dbSQWare/SQWarePredict/python-src
 4 mkdir -p $HOME/dbSQWare/SQWarePredict/python/3.12.8
 5 cd $HOME/dbSQWare/SQWarePredict/python-src
 6 tar -xzvf /tmp/Python-3.12.8.tgz
 7 cd Python-3.12.8
 8 
 9 # configure, dest => $HOME/dbSQWare/SQWarePredict/python/3.12.8
10 ./configure --prefix=$HOME/dbSQWare/SQWarePredict/python/3.12.8 --enable-optimizations

checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for python3.9... python3.9
checking for --enable-universalsdk... no
checking for --with-universal-archs... no
...

1 # compil
2 make

Running code to generate profile data (this can take a while):
# First, we need to create a clean build with profile generation
# enabled.
make profile-gen-stamp
make[1]: Entering directory '$HOME/dbSQWare/SQWarePredict/python-src/Python-3.12.8'
make clean
make[2]: Entering directory '$HOME/dbSQWare/SQWarePredict/python-src/Python-3.12.8'
find . -depth -name '__pycache__' -exec rm -rf {} ';'
...

1 # install
2 make install

Creating directory $HOME/dbSQWare/SQWarePredict/python/3.12.8/bin
Creating directory $HOME/dbSQWare/SQWarePredict/python/3.12.8/lib
if test "no-framework" = "no-framework" ; then \
        /usr/bin/install -c python $HOME/dbSQWare/SQWarePredict/python/3.12.8/bin/python3.9; \
...
...
Installing collected packages: setuptools, pip
  WARNING: The scripts pip3 and pip3.9 are installed in '$HOME/dbSQWare/SQWarePredict/python/3.12.8/bin' which is not on PATH.
  Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Successfully installed pip-23.0.1 setuptools-58.1.0

1 # creation des liens python et pip
2 cd $HOME/dbSQWare/SQWarePredict/python/3.12.8/bin
3 ln -s python3 python
4 ln -s pip3 pip

Mise à jour de l'environnement

Dans le ~dbsqware/.bash_profile

1 # env Python 3.12.8 (pour SQWarePredict)
2 export PATH=$HOME/dbSQWare/SQWarePredict/python/3.12.8/bin:$PATH
3 export LD_LIBRARY_PATH=$HOME/dbSQWare/SQWarePredict/python/3.12.8/lib:$LD_LIBRARY_PATH

1 # vérification du PATH
2 
3 dbsqware@vmsqwarebox:$HOME $ type python
4 python is $HOME/dbSQWare/SQWarePredict/python/3.12.8/bin/python
5 
6 dbsqware@vmsqwarebox:$HOME $ type pip
7 pip is $HOME/dbSQWare/SQWarePredict/python/3.12.8/bin/pip

1 # vérification des versions
2 
3 dbsqware@vmsqwarebox:$HOME $ python --version
4 Python 3.12.8
5 
6 dbsqware@vmsqwarebox:$HOME $ pip --version
7 pip 24.3.1 from $HOME/dbSQWare/SQWarePredict/python/3.12.8/lib/python3.12/site-packages/pip (python 3.12)

1 ## Mise en place de l'env Python
2 python -m venv $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env-3.12.8
3 cd $HOME/dbSQWare/SQWarePredict/python
4 ll SQWarePredict-python-env-3.12.8
5 ln -s SQWarePredict-python-env-3.12.8 SQWarePredict-python-env
6 . $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env/bin/activate

 1 dbsqware@vmsqwarebox:$HOME $ type python
 2 python is $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env-3.12.8/bin/python
 3 
 4 dbsqware@vmsqwarebox:$HOME $ type pip
 5 pip is $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env-3.12.8/bin/pip
 6 
 7 dbsqware@vmsqwarebox:$HOME $ python --version
 8 Python 3.12.8
 9 
10 dbsqware@vmsqwarebox:$HOME $ pip --version
11 pip 24.3.1 from $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env-3.12.8/lib/python3.12/site-packages/pip (python 3.12)

1 (SQWarePredict-python-env-3.12.8) dbsqware@srvdbsqware04:$HOME $ pip list
2 
3 Package Version
4 ------- -------
5 pip     24.3.1

Installation des dépendances

Attention, il faut avoir activé l'environnement "SQWarePredict-python-env" !

1 # Activation de l'env (si pas déjà fait !)
2 . $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env/bin/activate
3 
4 # Dépendances pip
5 (SQWarePredict-python-env-3.12.8) dbsqware@srvdbsqware04:$HOME/dbSQWare/SQWarePredict/python $ pip install --upgrade pip setuptools wheel

Requirement already satisfied: pip in ./SQWarePredict-python-env-3.12.8/lib/python3.12/site-packages (24.3.1)
Collecting setuptools
  Downloading setuptools-75.8.0-py3-none-any.whl.metadata (6.7 kB)
Collecting wheel
  Downloading wheel-0.45.1-py3-none-any.whl.metadata (2.3 kB)
Downloading setuptools-75.8.0-py3-none-any.whl (1.2 MB)
   ???????????????????????????????????????? 1.2/1.2 MB 14.4 MB/s eta 0:00:00
Downloading wheel-0.45.1-py3-none-any.whl (72 kB)
Installing collected packages: wheel, setuptools
Successfully installed setuptools-75.8.0 wheel-0.45.1

1 # Install dependances
2 cd $HOME/dbSQWare/SQWarePredict/engine/
3 pip install .

Processing $HOME/dbSQWare/SQWarePredict/engine
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting contourpy==1.3.1 (from SQWarePredict==1.0)
....
....
  Stored in directory: /tmp/pip-ephem-wheel-cache-l9urxsek/wheels/fb/0f/e3/8209d088cd9c825dd311fd9cbf83a320192744186bdc99b5ec
Successfully built SQWarePredict
Installing collected packages: pytz, tzdata, toml, six, python-dotenv, pyparsing, pillow, packaging, numpy, mysql-connector-python, kiwisolver, fonttools, cycler, scipy, python-dateutil, patsy, contourpy, pandas, matplotlib, statsmodels, seaborn, SQWarePredict
Successfully installed SQWarePredict-1.0 contourpy-1.3.1 cycler-0.12.1 fonttools-4.55.3 kiwisolver-1.4.8 matplotlib-3.10.0 mysql-connector-python-9.1.0 numpy-2.2.1 packaging-24.2 pandas-2.2.3 patsy-1.0.1 pillow-11.1.0 pyparsing-3.2.1 python-dateutil-2.9.0.post0 python-dotenv-1.0.1 pytz-2024.2 scipy-1.15.0 seaborn-0.13.2 six-1.17.0 statsmodels-0.14.4 toml-0.10.2 tzdata-2024.2

1 # Check des dépendances
2 pip list

Package                Version
---------------------- -----------
contourpy              1.3.1
cycler                 0.12.1
fonttools              4.55.3
kiwisolver             1.4.8
matplotlib             3.10.0
mysql-connector-python 9.1.0
numpy                  2.2.1
packaging              24.2
pandas                 2.2.3
patsy                  1.0.1
pillow                 11.1.0
pip                    24.3.1
pyparsing              3.2.1
python-dateutil        2.9.0.post0
python-dotenv          1.0.1
pytz                   2024.2
scipy                  1.15.0
seaborn                0.13.2
setuptools             75.8.0
six                    1.17.0
SQWarePredict          1.0
statsmodels            0.14.4
toml                   0.10.2
tzdata                 2024.2
wheel                  0.45.1

Paramétrer et tester SQWarePredict

Paramétrage de SQWarePredict

1 # Paramétrage des accès à la db (vous pouvez créer un nouveau compte ou utiliser celui de SQWareCentral !)
2 cd $HOME/dbSQWare/SQWarePredict/engine
3 cat sqwarepredict.ini

# Credentials for SQWarePredict

[db]
MysqlHost="localhost"
MysqlUser="sqware_predict"
MysqlPass="SQWarePredict1234."
MysqlDb="dbsqware_db"
MysqlPort=3306

Test de fonctionnement

1 # Activation de l'env et test de 'Predict'
2 . $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env/bin/activate
3 cd $HOME/dbSQWare/SQWarePredict/engine
4 python -m bin.predict -i sql -f $HOME/dbSQWare/SQWarePredict/param/generic/InstanceGrowth_size.ini -l Instance=SQWareCentral NbMonth=24 -m 6

Activer/désactiver l'environnement Python

1 # Activation de l'environnement Python
2 . $HOME/dbSQWare/SQWarePredict/python/SQWarePredict-python-env/bin/activate
3 ## Vous avez (SQWarePredict-python-env-3.12.8) qui s'affiche avant le prompt !
4 
5 # Désactivation de l'environnement Python (deactivate se déclare lors du source de l'env)
6 deactivate
7 ## Vous retrouvez votre prompt d'origine